FDM
Bambu Lab P1S
256 × 256 × 256 mm
- 0.4 mm nozzle (swappable)
- AMS — up to 4 colours or materials
- Enclosed chamber — for ABS, ASA, PA-CF
- Print speed up to 500 mm/s
Functional parts, prototypes, short runs, large format up to 25 cm per side.
Technologies & equipment
Our studio, no filter.
The hardware, the software, the materials and the colours we actually run. Updated on every change to the fleet.
Printers
The fleet.
Hardware picked for print reliability, dimensional accuracy and fast iteration.
Slicing software
From file to G-code, calibrated.
Our main slicer, in-house profiles, and pre-print quality control.
FDM slicer
Bambu Studio
Print profiles calibrated in-house for the Bambu Lab P1S and the AMS multi-material system. OrcaSlicer as backup for the more exotic community profiles. Every part goes through a layer preview and a support check before we hit print.
- In-house profiles for PLA, PLA+, PETG, ABS, ASA, TPU, PA-CF, PLA-CF
- Multi-colour slicing via AMS (up to 4 colours / materials)
- Systematic layer preview before every start
Materials
Ten materials, mastered.
All our filaments are sourced from Bambu Lab. Permanent stock for the most-used (PLA, PLA+, PETG); on-order for technical grades (typical +2-day lead time).
FDM filaments
PLA Basic
In stockCheap, easy, bio-sourced. For prototypes, decoration, study models.
PLA+ / Matte / Pro
In stockReinforced PLA. Tougher, ideal for semi-functional parts and matte finish.
PETG
In stockStrong, impact and moisture resistant. Versatile for functional parts.
ABS
On orderHeat and mechanical stress resistant. Enclosures, under-the-hood parts.
ASA
On orderLike ABS, with better UV resistance. For lasting outdoor use.
TPU 95A
On orderFlexible, elastic, shock-absorbing. Gaskets, soles, sleeves, ergonomic prototypes.
PAHT-CF (carbon-fibre nylon)
On orderVery wear- and friction-resistant. Gears, structural parts.
PLA-CF (carbon-fibre PLA)
On orderUltra-rigid composite. Light structural parts, drones, frames.
Colours
Thirty PLA Basic shades, on order.
Official Bambu Lab palette. Technical grades (ABS, ASA, TPU, composites) are mainly available in black, white and grey — other shades on request.
Click to copy the hex code
On-screen colours are indicative. For exact colour matching, we can print a chip before the final part.
Portfolio
Quelques réalisations récentes
Tournez chaque pièce, inspectez le détail. La sélection complète vit sur la page Réalisations.
FDM
Chef de projet
Pour Romain R. · Avril 2026
FDM
Support bouteille de vin
Pour Marc D. · Avril 2026
FDM
Lampe
Pour David P.
Frequently asked
Before you quote.
The questions we hear most often around technology and materials. If yours isn't here, drop us a line.
Which file formats do you accept?
STL, STEP, 3MF, OBJ. 3MF is preferred when available — it carries colours and print settings. For native CAD (Fusion 360, SolidWorks, Rhino), send the source: we extract what's needed.
What if my part is bigger than 25 cm?
Two options: print it in sections we assemble cleanly (discreet seam), or sub-contract to a large-format FDM partner. We tell you the cost and lead-time delta before production.
Do you print in metal?
Not in-house. For aluminium, steel or titanium (DMLS / SLM), we work with an identified partner. Same for SLS / MJF (high-precision sintered nylon). Add 5 to 10 days depending on tech.
What's the dimensional accuracy?
±0.1 to ±0.2 mm on most properly oriented FDM parts. Sub-millimetre on resin. Accuracy depends on geometry and orientation — we validate critical constraints before printing.
Can a single part mix multiple colours?
Yes, up to 4 colours or materials in one print thanks to the P1S AMS system. Colour transitions are clean but use a bit more filament — that's factored into the quote.
Ready to start your project?
Get a price estimate in under two minutes.
No file required. Pick technology, material, size and quantity — get an instant range and a detailed quote within 24h.